MODEL: END-KAG-KYG
Outlet in one direction, sloped drainage side,
with siphon bucket
MODEL: END-LAG-LYG
Exit from the corner, sloping towards the outlet,
with a siphon and a collection tray
MODEL: END-OAG-OYG
Outlet in the middle, sloping towards the outlet,
with a siphon and a collection tray
MODEL: END-1Y
Sloping in one direction, without a siphon.
MODEL: END-3AG-3YG
Three-sided drainage channel, outlet in the middle, sloping towards the outlet, with a siphon and a collection tray
MODEL: END-MULTI
With multiple outlets, each drain has two or more flow directions
Heavy Industrial Load
STANDARD FEATURES
They are modular and can be connected together to create a continuous wastewater drainage system with a maximum length of 2500 mm.
Continuous drainage systems can be interconnected via slot flanges equipped with Teflon seals. This allows the length of the watertight drainage system to be adjusted as needed.
Type 1: Gutter width 135 mm
Type 2: Gutter width 150 mm
Type 3: Gutter width 175 mm
Type 4: Gutter width 200 mm
Type 5: Gutter width 250 mm
Type 6: Gutter width 300 mm
Type 7: Gutter width 350 mm
Type 8: Gutter width 400 mm
Type 9: Gutter width produced upon special request.
With a grating gutter of a minimum depth of 55 mm and a maximum depth of 250 mm, it is possible to create a continuous wastewater drainage system with a maximum length of 18000 mm with a constant slope of 0.6% towards the outlet.
Continuous wastewater drainage systems can be manufactured to desired dimensions, provided the slope conforms to the minimum and maximum depth.
In the fixed slope and variable depth wastewater drainage system, stainless steel gutter elements are manufactured with a constant slope of 0.6% towards the outlet tray, unless otherwise indicated.
The slope of the trench and the minimum and maximum depths of the trench can be adapted to the desired dimensions, provided they comply with the applicable dimensions.
OPTIONS
Optionally, the grate can be made of AISI 316 quality stainless steel.