Stainless Steel Drains
Custom made from our own factory

Insulated stainless steel modular drainage channels for light load
 are suitable for chemical floor finishes and concrete floors

stainless steel modular channel model INYD KAG 1

MODEL: INYD-KAG-KYG

Outlet in one direction, sloped drainage side,
with siphon bucket
stainless steel modular channel model INYD LAG 1

MODEL: INYD-LAG-LYG

Corner exit, inclined towards the outlet,
with siphon and collection tray
stainless steel modular channel model INYD OAG 1

MODEL: INYD-OAG-OYG

Outlet in the middle, sloping towards the outlet,
with a siphon and a collection tray
stainless steel modular channel model INYD 3AG 1

MODEL: INYD-3AG-3YG

Three-sided drainage channel, outlet in the middle, sloping towards the outlet, with a siphon and a collection tray
stainless steel modular channel model NYD 1Y 1

MODEL: INYD-1Y

Sloping in one direction, without siphon
.
stainless steel modular channel model INYD MULTI 1

MODEL: INYD-MULTI

With multiple outlets, each drain has two or more flow directions

Areas of Application:

Industrial for the production and processing in kitchens and facilities:

  • Meats and Delicatessen
  • Vegetables and Fruits
  • Dairy Products
  • Fish and Seafood
  • Poultry and Eggs
  • Frozen Food Products
  • Water, Juices, and Alcoholic
  • Beverages Bread and Flour-Based Products
  • Chocolate and Confectionery
  • Pharmaceuticals
Gratings
Filter Baskets

Light Industrial Load

STANDARD FEATURES

It is possible to create a continuous wastewater drainage system with a maximum length of 2500 mm by connecting modular units together. Continuous water drainage systems can be interconnected using flanges equipped with Teflon seals. This allows the length of the watertight drainage system to be adjusted to the desired length.

Type 1: Channel width 135 mm

Type 2: Channel width 150 mm

Type 3: Channel width 175 mm

Type 4: Channel width 200 mm

Type 5: Channel width 230 mm

Type 6: Channel width 300 mm

Type 7: Channel width 400 mm

Type 8: Channel width custom-made according to special requests.

It is possible to create a continuous wastewater drainage system with a grate of at least 40 mm depth and up to 250 mm depth, with a constant slope of 0.6% towards the outlet, and a maximum length of 18000 mm.

Continuous water drainage systems can be custom-made to the desired dimensions, provided they comply with the slope, minimum and maximum depth.

In the water drainage system with a constant slope and variable depth, stainless steel channel elements are produced, unless otherwise requested, with a constant slope of 0.6% towards the gutter.

The slope of the gutter and the minimum and maximum depths of the gutter can be custom-made to the applicable dimensions.

OPTIONS
It is optionally possible to make the grate in AISI 316 quality stainless steel.