Stainless Steel Drains
Custom made from our own factory

Insulated stainless steel modular drainage channels for heavy loads.
Suitable for chemical floor coatings and concrete floors

stainless steel modular channel model IEND KAG 1

MODEL: IEND-KAG-KYG

Outlet in one direction, sloped drainage side,
with siphon bucket
stainless steel modular channel model IEND LAG 1

MODEL: IEND-LAG-LYG

Exit from the corner, sloping towards the outlet,
with a siphon and a collection tray
stainless steel modular channel model IEND OAG 1

MODEL: IEND-OAG-OYG

Outlet in the middle, sloping towards the outlet,
with a siphon and a collection tray
stainless steel modular channel model IEND 3AG 1

MODEL: IEND-3AG-3YG

Three-sided drainage channel, outlet in the middle, sloping towards the outlet, with a siphon and a collection tray

.

stainless steel modular channel model IEND MULTI 1

MODEL: IEND-MULTI

With multiple outlets, each drain has two or more flow directions
stainless steel modular channel model END 1Y 1

MODEL: IEND-1Y

Sloping in one direction, without a siphon

Areas of Application:

Industrial for the production and processing in kitchens and facilities:

  • Meats and Delicatessen
  • Vegetables and Fruits
  • Dairy Products
  • Fish and Seafood
  • Poultry and Eggs
  • Frozen Food Products
  • Water, Juices, and Alcoholic
  • Beverages Bread and Flour-Based Products
  • Chocolate and Confectionery
  • Pharmaceuticals
Gratings
Filter Baskets

Insulated Modular Drainage Channels for Heavy Industrial Loads

STANDARD FEATURES

They are modular and connected to each other to form a continuous wastewater drainage system with a maximum length of 2500 mm. Continuous drainage systems can be connected to each other via notched flanges with Teflon seals. This allows for the desired length of the watertight drainage system to be achieved.

Type 1: Gutter width 135 mm

Type 2: Gutter width 150 mm

Type 3: Gutter width 175 mm

Type 4: Gutter width 200 mm

Type 5: Gutter width 250 mm

Type 6: Gutter width 300 mm

Type 7: Gutter width 400 mm

Type 8: Gutter width custom-made upon special request

With a grating gutter with a minimum depth of 55 mm and a maximum depth of 250 mm, it is possible to create a continuous wastewater drainage system with a maximum length of 18000 mm and a constant slope of 0.6% towards the outlet.

Continuous wastewater drainage systems can be manufactured to the desired dimensions, provided the slope complies with the minimum and maximum depth.

In the fixed slope and variable depth wastewater drainage system, stainless steel gutter elements are manufactured with a constant slope of 0.6% towards the outlet tray, unless otherwise requested.

The slope of the gutter and the minimum and maximum depths can be adapted to the desired dimensions, provided they remain within applicable limits.

OPTIONS
Optionally, the grate can be made of AISI 316 quality stainless steel.