NYD-1Y-230
NYD-1Y-300

Light Industrial Load

STANDARD FEATURES

It is possible to create a continuous wastewater drainage system with a maximum length of 2500 mm by connecting modular units to each other. Continuous wastewater drainage systems can be connected with flanges equipped with Teflon seals. This allows the length of the watertight drainage system to be adjusted to the desired length.

Type 1: Gutter width 135 mm

Type 2: Gutter width 150 mm

Type 3: Gutter width 175 mm

Type 4: Gutter width 200 mm

Type 5: Gutter width 230 mm

Type 6: Gutter width 300 mm

Type 7: Gutter width 350 mm

Type 8: Gutter width 400 mm

Type 9: Gutter width custom-made according to special requests

It is possible to create a continuous wastewater drainage system with a grating gutter with a minimum depth of 40 mm and a maximum of 250 mm, with a constant slope of 0.6% towards the outlet, and a maximum length of 18000 mm.

Continuous wastewater drainage systems can be customized to the desired dimensions, provided they comply with the slope, minimum and maximum depth. In the constant slope and variable depth wastewater drainage system, stainless steel channel elements are, unless otherwise requested, produced with a constant slope of 0.6% towards the collection tray. The slope of the gutter and the minimum and maximum depths of the gutter can be customized according to the applicable dimensions.

OPTIONS

Optionally, the grate can be made of AISI 316 quality stainless steel.